840 Abrasive Compound
840 is an aluminum oxide based abrasive compound. It is formulated with a moderate alkaline build and suspension additives. This product keeps media and abrasive particulate sharp and working hard. This highly refined blend is designed to give both optimum cut-down times and finish color on a wide variety of alloys.
|Appearance:||Gray Speckled Powder|
|pH @ 1% Solution:||10.2|
|Solubility in water:||40%|
|Metal Safety:||All Metals|
|Bulk Density:||90# / cu. ft.|
|Standard Container:||500 lb. fiber|
Refer to our Material Safety Data Sheet for additional information.
Usage and Dilution Instructions
For usage in rotary barrel and vibratory finishing operations to debur and improve surface qualities. Usage will vary greatly depending on nature of parts, amount of water used, time requirements, finish desired, equipment employed, media used (if any), and other physical properties related to the process. Consult your sales representative for recommendations specific to your operation.
Handling & Storage
This product does not pose any fire hazards. Use good industrial hygiene practices such as wearing chemical safety goggles, rubber gloves, impermeable apron, rubber boots, as necessary to prevent personal contact. NIOSH approved respirator is recommended if dust is expected to be generated. In case of eye contact flush eyes with water for 15 minutes and consult physician. In case of skin contact, flush with water. Remove contaminated clothing promptly. Keep product containers tightly closed whennot in use. Store in the original container in cool dry place. When stored as above, shelf life is a minimum of 2 years.
Progress Chemical guarantees its products will perform to your satisfaction when used in accordance to our recommendations. We back this guarantee with over 65 years experience. Our company has been certified to ISO 9001-2015 Quality Standards.