300 Derusting & Descaling Compound

300 Derusting and Descaling Compound is a highly acidic granular compound with added wetting and penetrating agents. It is specifically formulated for removing rust, scale, and oxides from metal parts during mass finishing operations. This product is biodegradable.

Physical Properties

Appearance: Beige Granular Powder
pH @ 1% Solution: 1.0
Odor: Acidic
Foaming Action: Moderate
Solubility in Water: Complete
Rinsing Action: Excellent
Flash Point: None
Bulk Density: 65 lbs/cu. ft.
Stability: Stable

Refer to our Material Safety Data Sheet for additional information.

Usage and Dilution Instructions

Normal dilution range is from 1 to 4 ounces per gallon of water. If parts are oily or excessively dirty, they should be degreased in alkaline cleaner first. Care should be taken to determine cycle time requirements and concentration to be used, which will vary depending on nature of parts, amount of rust or scale on parts, and finish desired. Parts would normally be neutralized in an alkaline product or other inhibitor after being descaled in order to prevent further scaling or rusting.

Handling & Storage

This is a highly acidic product. It forms dilute sulfuric acid when dissolved in water. Use good industrial hygiene practices such as wearing chemical safety goggles, face shield, rubber gloves, impermeable apron, and boots as necessary to prevent personal contact. Store in a cool dry place in a properly labeled closed container When stored as above, shelf life is a minimum of 2 years.

Guaranteed

Progress Chemical guarantees its products will perform to your satisfaction when used in accordance to our recommendations. We back this guarantee with over 65 years experience. Our company has been certified to ISO 9001-2015 Quality Standards.

QUESTIONS

We are ready to answer your question and supply you with top quality products.

Name(Required)

Looking for Solid Solutions?

A FAMILY OWNED BUSINESS SINCE 1946 WITH EXPERIENCE YOU CAN COUNT ON.

Guaranteed

When questions arise, or processes, specifications or conditions change, our experienced customer support group will respond quickly to your needs and back you up with whatever is needed to keep your operation working smoothly.

Expert Advice

Progress Chemical can provide you with expert advice on product application and select the right product from our diverse selection of mass finishing and parts washing products. Give us a call:  (616) 534-6103 and let an expert assist you.

page1-img4
ANAB
ACCREDITED
page1-img3
ASR CERTIFIED
QMS
PRODUCT
INFO

FREE CONSULTATION

We have a complete Testing Laboratory equipped with custom formulation capabilities to create solutions for your individual finishing problems. Contact Us today to schedule your FREE Consultation.

IMG_4144 3