301 Derusting & Descaling Compound
301 Derusting and Descaling Compound is a highly acidic granular compound with added wetting and penetrating agents. It is specifically formulated for removing rust, scale, and oxides from metal parts during mass finishing operations. This product is biodegradable.
|Appearance:||Beige Granular Powder|
|pH @ 1% Solution:||1.0|
|Solubility in Water:||Complete|
|Bulk Density:||65 lbs/cu. ft.|
Refer to our Material Safety Data Sheet for additional information.
Usage and Dilution Instructions
Normal dilution range is from 1 to 4 ounces per gallon of water. If parts are oily or excessively dirty, they should first be degreased in alkaline cleaner. Care should be taken to determine cycle time requirements and concentration to be used, which will vary depending on nature of parts, amount of rust or scale on parts, and finish desired. Parts would normally be neutralized in an alkaline product or other inhibitor after being descaled in order to prevent further scaling or rusting.
Handling & Storage
This is a highly acidic product. It forms dilute sulfuric acid when dissolved in water. Use good industrial hygiene practices such as wearing chemical safety goggles, face shield, rubber gloves, impermeable apron, and boots as necessary to prevent personal contact. Store in a cool dry place in a properly labeled closed container When stored as above, shelf life is a minimum of 2 years.
Progress Chemical guarantees its products will perform to your satisfaction when used in accordance to our recommendations. We back this guarantee with over 65 years experience. Our company has been certified to ISO 9001-2015 Quality Standards.
We are ready to answer your question and supply you with top quality products.
We have a complete Testing Laboratory equipped with custom formulation capabilities to create solutions for your individual finishing problems. Contact Us today to schedule your FREE Consultation.