AD-550 Parts Washer Compound
AD-550 is a parts cleaning compound for use in heated spray wash applications. It was specifically formulated for removing grease, oil, rust, scale, and smut from ferrous metal surfaces. This product combines potent wetting and chelating agents with a high alkaline build to work effectively under heavy soil conditions.
|pH @ 1% Solution:||13.2|
|Foaming Action:||Very Low|
|Metal Safety:||Ferrous Metals Only|
Refer to our Material Safety Data Sheet for additional information.
Usage and Dilution Instructions
This product is intended for use in automated spray application parts washers. Solution concentrations should be maintained between 4 and 12 ounces per gallon of water. Cleaning solution temperatures should be maintained between 150° and 190° F. Periodic adds of 1 to 2 ounces per gallon should be made to extend cleaning solution life. Usage may vary depending on soil load, nature of parts, equipment design, time requirements and other physical properties related to the process.
Handling & Storage
This is a highly alkaline product containing Sodium Hydroxide. Use good industrial hygiene practices such as wearing chemical safety goggles, rubber gloves, impermeable apron, and other appropriate protective clothing to prevent personal contact. Wash thoroughly after handling this product. In case of skin or eye contact, flush with plenty of water for at least 15 minutes and call a physician. Stock should be rotated and stored in a tightly closed container within a cool dry place to reduce caking. When stored as stated above, shelf life is a minimum of 2 years.
Progress Chemical guarantees its products will perform to your satisfaction when used in accordance to our recommendations. We back this guarantee with over 65 years experience. Our company has been certified to ISO 9001-2015 Quality Standards.